Asus AT5NM10T-I NA Gebruikershandleiding - Pagina 22
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Asus AT5NM10T-I NA. Asus AT5NM10T-I NA 42 pagina's. User manual
Ook voor Asus AT5NM10T-I NA: Gebruikershandleiding (43 pagina's)
Pagina afdrukken
4.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
AT5NM10T-I Chassis intrusion connector
5.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
AT5NM10T-I Speaker out connector
6.
LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT
standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
AT5NM10T-I LPT connector
ASUS AT5NM10T-I
CHASSIS
SPEAKER
PIN 1
LPT
SLCT
GND
PE
GND
BUSY
GND
ACK#
GND
PD7
GND
PD6
GND
PD5
GND
PD4
GND
PD3
SLIN#
PD2
INIT#
PD1
ERR#
PD0
AFD
STB#
PIN 1
1-12