DORIC DS2500 Installatiehandleiding - Pagina 6
Blader online of download pdf Installatiehandleiding voor {categorie_naam} DORIC DS2500. DORIC DS2500 6 pagina's. Flush mount mortice sliding door lock
Pagina afdrukken
INSTALLATION GUIDE
DN1293 SURFACE KEEPER INSTALLATION:
1. Insert the 2 x countersunk
screw into the provided jig.
2. Insert the provided jig
into the lockbody and over
the anti-crash button.
3. Close the door with firm
but not excessive force.
Jig with
screws
installed
DS2500 I
4. Open the door and note
the marked positions
provided by the screws.
5. Pre drill the keeper
fixing holes.
FLUSH MOUNT MORTICE
SLIDING DOOR LOCK
6. Screw the keeper into the fixing holes.
7. Adjust the keeper position through
the use of packers, and/or the
adjustment screws.
8. Remove the jig from the lockbody.
9. Close the door and test the operation.
Packer
A
C
For horizontal
adjustment
B
B
Horizontal
Adjustment Screws
Fine tune horizontal
adjustment
Vertical
C
Adjustment Screws
B
Fixing slots allow
for adjustment
C
Head office:
38 Redfern St
Wetherill Park NSW 2164
Australia
5
A
OR
(If required)
Ph: 1300 132 389
Fax: 1300 652 292
www.doric.com.au