DORIC OTPG 8 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DORIC OTPG 8. DORIC OTPG 8 16 pagina's. Optogenetics ttl pulse generator
Pagina afdrukken7. The Repeatable sequence checkbox, when selected, allows a sequence to be repeated. Not all modes and
trigger types can be repeated. Please refer to the Figure
8. The Sequence Visualisation shows a graphical representation of the behavior of the selected Trigger Option
Type, Mode and Repeatability.
2.1.3 Sequence Options Section
CW (Continuous Wave) Mode
The CW (Continuous Wave) channel mode allows the creation of a continuous TTL signal. The following elements
appear in the Sequence Options section (Fig. 2.9).
1. The Starting Delay de nes the time between the activation of the pulse sequence and the beginning of the
signal.
2. The Time ON de nes the length of time the continuous signal is active. Should the time chosen be 0, the signal
will continue until the pulse is stopped manually.
3. The Total Duration shows the total expected duration of the pulse sequence. Should the duration be in nite,
the box will display
Chapter 2. Operations Guide
1
2
3
Figure 2.9: Sequence Options of the CW Channel Mode.
. If there is an error in parameter selection, this box will display N/A.
2.8
to know the repeatable sequence combinations.
9