Akyga AK-CA-38 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Akyga AK-CA-38. Akyga AK-CA-38 4 pagina's. Pico power adapter
Pagina afdrukken
AK-CA-38 - user manual
Removing the most common problems
Problem
The
adapter or computer
connected
components
via power supply /
adapter does not work
The computer turns off
Connecting the adapter to the computer components:
1.
Connect the 24-pin adapter's plug to 24-pin socket on mother board. Try not to touch the
electronic components or contacts on the adapter.
2.
Connect the P4 connector to the motherboard if it is required by CPU to stabilize the work.
3.
Connect the Molex plug to a hard disk, optical drive or fan with a corresponding Molex socket.
4.
Connect the SATA plug to a hard disk or optical drive with a corresponding SATA socket.
5.
In case the P4, Molex and Sata plug are not used, unplug it from the adapter.
6.
Then, take out the power cord of the housing, in a way that provides easy and safe access to
connect an external 12V power supply without opening the case.
Cleaning the power supply:
Disconect the adapter from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the adapter.
ź
Do not use abrasive or chemical cleaners.
ź
Cause
No mains voltage
The power adapter is
overloaded
Incorrect connection of
the device
There is a suspicion of a
product defect
The adapter has
insufficient parameters
Solution
Check the correct connection of
ź
the power supply to the power
network
Check the mains fuses
ź
Disconnect the power adapter
ź
from energy grid, check the
correctness of the current
parameters
Make sure that the adapter is
ź
correctly connected to the
computer components
Check that the wires are well
ź
embedded in the sockets
Stop using and contact the
ź
seller
Check if the power of the
ź
adapter covers the demand of
the computer components
p. 3