Canon 7215 - LV XGA LCD Projector Specificatie - Pagina 9
Blader online of download pdf Specificatie voor {categorie_naam} Canon 7215 - LV XGA LCD Projector. Canon 7215 - LV XGA LCD Projector 22 pagina's. Mounting hanger for low ceilings
Ook voor Canon 7215 - LV XGA LCD Projector: Specificatie (47 pagina's), (Japanse) Montage- en installatiehandleiding (8 pagina's)
Pagina afdrukken
Basic Serial Functional Specification for LV-5210/7215/7210
6.4 Operation Requirements
When the projector's status in this below, functional execution commands are limited.
Projector Status
Standby Mode
Processing Countdown
Processing Cooling Down
Abnormal Temperature Status
Processing Mode Change
Processing Power Save・Cooling
Down
Processing Power Save
Note) When the status is above, even if the projector receives other command in the above
status, the projector returns [ACK] [CR].
6.5 POWER ON COMMAND
COMMAND
"C00" [CR]
Note) When the status is above, even if the projector receives other command
Detail
in the above status, the projector returns [ACK] [CR].
Acceptable
Response
Unacceptable
6.6 POWER OFF COMMAND (QUICK Power OFF)
COMMAND
"C01" [CR]
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
Detail
control, "Power OFF" will be displayed. However, as soon as this command
is sent, Quick Power OFF is executed.
Acceptable
Response
Unacceptable
6.7 POWER OFF COMMAND
COMMAND
"C02" [CR]
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
Detail
control, "Power OFF" will be displayed. However, as soon as this command
is sent, Power OFF is executed.
Acceptable
Response
Unacceptable
Available Functional Execution Commands
C00:POWER ON Only
C00:POWER ON→Terminate processing Countdown
C01:POWER OFF
C02:POWER OFF→Terminate processing Countdown
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
C00:POWER ON
C01:POWER OFF
Other Commands: POWER ON
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page
9