Canon LV-7275 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon LV-7275. Canon LV-7275 25 pagina's. Projector monitoring software v1 starter guide
Ook voor Canon LV-7275: Producthandleiding (18 pagina's), Starthandleiding (6 pagina's)
Pagina afdrukken
4
Complete the dialog with necessary information and click the [OK] button.
Category
IP address
Port number
Timeout
Note
-
An error message will appear and settings will not be registered if a value
of an entry is invalid or insufficient. Correct it as required.
-
Entries will be cancelled if [X] (Close) or [Cancel] button is clicked before
clicking the [OK] button.
-
To change an IP address, select an item from the discovery range list and
click the [Edit] button to reconfigure the settings.
-
To delete an unnecessary IP address, select an item from the discovery
range list and click [Delete].
-
Projectors may doubly display when the IP address of a projector is
changed. In this case, delete the projector with an old IP address.
Enter an IP address of the projector, in "XXX.XXX.XXX.XXX" form.
Enter a port number to be used, in one-byte numbers. Default
value is set to "7142."
Enter a number of seconds to time out, from 1 to 9.
CHAPTER 1 • Introduction
Description
9