Canon LV-7325U Gebruikershandleiding - Pagina 45

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon LV-7325U. Canon LV-7325U 48 pagina's. Canon multimedia projector owner's manual lv-7325u

Pagina afdrukken

Problem:

Remote Control Unit

does not work.

Wireless Mouse

function does not

work.

The image data in

memory card isn't

displayed.

The image data can't

be written in, read

from the memory

card.

WARNING :

High voltages are used to operate this projector. Do not attempt to open the cabinet.

Check the batteries.

Check the ALL-OFF switch on the Remote Control Unit is set to "ON.".

Make sure nothing is between the Remote Receiver and the Remote Control Unit.

Make sure you are not too far from the projector when using the Remote Control Unit.

Maximum operating range is 16.4' (5m)..

Check the cable connection between the projector and the computer.

Check the mouse setting on your computer.

Turn the projector on before you turn on the computer.

Check the memory card is inserted properly into PC CARD SLOT.

Check a memory card is set properly.

Check MCI mode is selected.

Check the image data is recorded in the memory card properly.

Start the projector again.

Check the projector is turned on.

Check "Card access" in VIEW menu is selected.

Check Control Cable for Serial Port (optional) is connected properly.

Check the memory card is inserted properly into PC CARD SLOT.

Check Media Card Imager (supplied) is installed in your computer properly.

Check the setting in Media Card Imager (like Serial Port Setting) is set properly.

Try these Solution

APPENDIX