Canon LV-7350 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon LV-7350. Canon LV-7350 48 pagina's. Canon owner's manual multimedia projector lv-7355 lv-7350
Ook voor Canon LV-7350: Brochure & specificaties (2 pagina's)

Pagina afdrukken

PREPARATION

This projector uses nominal input voltages of 100-120 V or 200-240

V AC. This projector automatically selects the correct input

voltage. It is designed to work with single-phase power systems

having a grounded neutral conductor. To reduce risk of electrical

shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure

of the type of power supply being in use.

Connect a projector with peripheral equipment before turning the

projector on. (Refer to pages 11 ~ 13 for connection.)

CAUTION

For safety, unplug AC Power Cord when an appliance is not

used.

When this projector is connected to the outlet with AC Power

Cord, an appliance is in Stand-by Mode and consumes a little

electric power.

NOTE ON THE POWER CORD

The AC Power Cord must meet the requirement of the country where you use the projector.

Confirm the AC plug type with the chart below. The proper AC power cord must be used.

If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.

Projector side

SETTING-UP PROJECTOR

CONNECTING AC POWER CORD

For the U.S.A. and Canada

To the POWER CORD

CONNECTOR on the

projector.

Connect AC Power Cord (supplied) to a projector.

The AC outlet must be near this equipment and

must be easily accessible.

AC Outlet side

For Continental Europe

Ground

To the AC Outlet.

(120 V AC)

To the AC Outlet.

(200 - 240 V AC)