Canon LV-7565 Specificatie - Pagina 19
Blader online of download pdf Specificatie voor {categorie_naam} Canon LV-7565. Canon LV-7565 47 pagina's. Multimedia projectors
Ook voor Canon LV-7565: Brochure & specificaties (6 pagina's), Brochure (6 pagina's), Specificaties (6 pagina's)
Pagina afdrukken
Expand Serial Command Specification
8.4.15. CF_COLMNLD Command
Command
"CF_COLMNLD_%1" [CR]
%1
"000" ~ "009" --------- Specify store area
Call Color Management setting status from an area by %1 specification.
Details
(Only valid when it is in the usual Power On state)
Acceptable
Response
Unacceptable
8.4.16. CF_TURBO Command
Command
"CF_TURBO_%1" [CR]
"ON" ------------ Set Bright SW to On
%1
"OFF" ----------- Set Bright SW to Off
Set Bright SW to the status by %1specification.
Details
(Only valid when it is in the usual Power On state)
Acceptable
Response
Unacceptable
8.5. PC Control Series Command
8.5.1. CF_FSYNC Command
Command
"CF_FSYNC_%1" [CR]
"0000 ~ 0031" --------- Directly set Fine Sync setting value
%1
"UP" ---------------------- Fine Sync setting value +1
"DN" ---------------------- Fine Sync setting value -1
Set Fine Sync. (Only valid when it is in the usual Power On state)
The value set by this Command will not be saved to the Projector. Therefore,
when All Off the Projector, the value will return to the original setting. (Stand
Details
by mode stays)
Note: When %1 is directly specified, this command is not enough to execute for
Acceptable
Response
Unacceptable
8.5.2. CF_TDOTS Command
Command
"CF_TDOTS_%1" [CR]
"nnnn ~ 9999" ----------- Directly set Total Dots value
%1
"UP" ------------------------ Total Dots setting value +1
"DN" ------------------------ Total Dots setting value -1
Set Total Dots. (Only valid when it is in the usual Power On state)
The value set by this Command will not be saved to the Projector. Therefore,
when All Off the Projector, the value will return to the original setting. (Stand
Details
by mode stays)
Note: When %1 is directly specified, this command is not enough to execute for
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
the screen. To show up on the image, issue CF_SETPCADJ Command.
"000" [CR]
"101" [CR] ---- When Input is Video series
"nnnn" means minimum value. This is the total value
of current Display Dots + Horizontal Position.
the screen. To show up on the image, issue CF_SETPCADJ Command.
"000" [CR]
"101" [CR] ---- When Input is Video series
Page 18 of 46