Canon REALiS SX80 Mark II D Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon REALiS SX80 Mark II D. Canon REALiS SX80 Mark II D 25 pagina's. Projector
Ook voor Canon REALiS SX80 Mark II D: Producthandleiding (12 pagina's), Producthandleiding (13 pagina's), Brochure & specificaties (12 pagina's), Aanvullende handleiding (10 pagina's), Brochure & specificaties (12 pagina's), Brochure & specificaties (4 pagina's), Producthandleiding (18 pagina's), Kenmerken (19 pagina's), Gebruikershandleiding (1 pagina's), Producthandleiding (10 pagina's), Brochure (27 pagina's), Veelgestelde vragen (1 pagina's), Productspecificatie (2 pagina's), Gebruikershandleiding (2 pagina's), Brochure (2 pagina's), Brochure (32 pagina's), Brochure & specificaties (12 pagina's), Brochure & specificaties (12 pagina's), Kenmerken en specificaties (3 pagina's)

Pagina afdrukken
Canon REALiS SX80 Mark II D Gebruikershandleiding
4
Complete the dialog with necessary information and click the [OK] button.
Category
IP address
Port number
Timeout
Note
-
An error message will appear and settings will not be registered if a value
of an entry is invalid or insufficient. Correct it as required.
-
Entries will be cancelled if [X] (Close) or [Cancel] button is clicked before
clicking the [OK] button.
-
To change an IP address, select an item from the discovery range list and
click the [Edit] button to reconfigure the settings.
-
To delete an unnecessary IP address, select an item from the discovery
range list and click [Delete].
-
Projectors may doubly display when the IP address of a projector is
changed. In this case, delete the projector with an old IP address.
Enter an IP address of the projector, in "XXX.XXX.XXX.XXX" form.
Enter a port number to be used, in one-byte numbers. Default
value is set to "7142."
Enter a number of seconds to time out, from 1 to 9.
CHAPTER 1 • Introduction
Description
9