Akyga AK-QI-02 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Akyga AK-QI-02. Akyga AK-QI-02 4 pagina's.
Pagina afdrukkenAK-QI-02 - user manual
In case of any doubts regarding operation, safety or connection of the product, please contact
ź
the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by a
ź
qualified person in a specialist facility.
Removing the most common problems
Problem
A device connected via
induction does not
charging
Slow charging process
A device connected via
induction does not
charging or displays a
message about the non-
genuine charger
Cause
No mains voltage
The power supply is
overloaded
There is a suspicion of a
product defect
Bad phone position
Too long distance
between the chager and
the phone
Poor parameters of the
connected USB charger
The power supply does
not correspond to the
current parameters
Solution
Check the correct connection of
ź
the power supply to the mains
socket
Check the mains fuses
ź
Disconnect the power supply
ź
from the device, check the
correctness of the current
parameters
Stop using and contact with
ź
seller
Placed the phone directly on
ź
the charging surface
Place the phone with the back
ź
side in the center of the
charging surface
Do not charge your phone close
ź
to intense magnetic field
sources
Take off the case
ź
Place the phone with the back
ź
side in the center of the
charging surface
Do not place any objects
ź
between the charginng surface
and the phone while charging
Clean the charging surface and
ź
back side of the phone
The USB charger used has too
ź
low output amperage (current)
Disconnect the power supply
ź
from device and check if current
parameters are correct
Check if the receiver module is
ź
correctly installed, if it was
added
Contact with seller
ź
p. 3