dormak CR43 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dormak CR43. dormak CR43 12 pagina's.
Pagina afdrukken
1. Start mowing on the area next to the
power supply socket, so that the extension
cable may extend over the lawn as you get
far from the socket.
2. Mow more often during the growth period,
as the grass must be cut maximum a 1/3
height at a time.
Do not overcharge the lawn-mower
Cutting a too high grass will lead to a lower
engine rotation which can be clearly heard.
As speed decreases, the engine may become
overloaded and the lawn-mower damaged. If
the grass is very high and dense the first cut
must be made at a reasonable height, and, if
you want a shorter grass, cut it a second time
at a lower height. This is a good way to avoid
the engine overcharge.
05.
care and
Maintenance of the
laWn-MoWer
5.1. how to clean the equipment
- Always use adequate gloves;
- IMPORTANT: keeping the lawn-mower
clean is very important. Grass residues on
the air entrances or under the deck may be
dangerous for fire hazard.
1. Wip out the grass from the deck with a
brush;
2. With a soft brush, remove all residues
10
from the air entrances, grass ejection gap
and grass bag;
3. Clean the visible surfaces of the machine
with a dry wiper.
- IMPORTANT: never clean the lawn-mower
with water. Do not use chemical products,
including gasoline, nor solvents – these
substances may damage some important
plastic pieces.
5.2. how to store the lawn-mower
Store it at a fresh dry palce, protected
from damages and out of children reach.
Never store outside.
At the end of the season:
1. Replace any nuts, oins or screws, if
necessary.
2. Properly clean the equipment.
3. Make sure the electric cable is quite tidy to
prevent damages.