Dormakaba ORACODE 480 Series Handleiding voor installatie-instructies - Pagina 5
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dormakaba ORACODE 480 Series. Dormakaba ORACODE 480 Series 10 pagina's.
Ook voor Dormakaba ORACODE 480 Series: Installatiehandleiding (5 pagina's)
Pagina afdrukken
Install inside trim assembly
9
1.
Before tightening the screws verify functionality by extracting and retracting the
Deadbolt. The dead bolt should move smoothly.
2. All screws shall be thighten properly.
3. Connect batteries, v1 to v2, after tightening all screws and wiring w1 & w2.
4. Longer screw available for door over 2" to 2.5" Please order hardware kit 062-
515743.
5. Warning: using the long screw for door below 1 21/32" will damage the mechanism.
10
Install inside cover
2
PK3700 2023-05-01
W2
3
V1
W1
1
Connect w1 to w2
(communication if applicable)
Connect v1 to v2
(power)
Use short 8-32 screws on door
thickness 1 3/8" up to 1 21/32".
Use long 8-32 screws on door
thickness 1 21/32 up to 2.0"
Use short 6-32 screws on door
thickness 1 3/8" up to 1 21/32".
Use long 6-32 screws on door
thickness 1 21/32 up to 2.0"
Use 12-24 screw
V2
After connecting the cables
route the cable through the clip
Harness must not interfere with
hole when inserting screw 8-32