BOLTON KF-SP-1 Installatie- en bedieningshandleiding - Pagina 3

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} BOLTON KF-SP-1. BOLTON KF-SP-1 13 pagina's. Stock pot range

INSTALLATION, OPERATION AND CARE OF

Stock pot ranges are designed for commercial use only and feature fast, efficient gas heat.

Each burner is controlled by an adjustable gas valve. Heavy-duty, cast iron top grate(s) are

easily removed for cleaning when cool. A grease drawer is provided to collect fat run-off; it

opens to the front for inspection or drain-off.

Model No.

Single stock pot

Dual stock pot

THIS APPLIANCE IS EQUIPPED FOR NATURAL GAS.

For Natural gas when equipped with No. #32(

For LP gas when equipped with No.#47

For conversion to LP gas see instruction plate on the appliance, see Page 10.

UNPACKING

This stock pot was inspected before leaving the factory. The carrier assumes full responsibility for the

safe delivery upon acceptance of the shipment. Check for possible shipping damage immediately after

receipt.

If the stock pot is found to be damaged, complete the following steps:

Carrier must be notified within 5 business days of receipt.

Carrier's local terminal must be notified immediately upon discovery (note time, date, and

Who was spoken to), and follow up and confirm with written or electronic communication.

All original packing materials must be kept for inspection purposes.

The stock pot can not have been moved, installed, or modified.

Remove all packing material and protective plastic from the surfaces of the unit. Before

installing, verify that the type of gas (natural or propane) and the clearance dimensions agree

with the specifications on the rating plate which is located at the back of the stock pot.

STOCK POT RANGE

GENERAL

# of

BTU

Burners

80,000

160,000

φ3.0mm

(φ2.0mm) drill size orifice.

INSTALLATION

Orifice size

Nat.

#32(φ3.0mm) #47(φ2.0mm)

) drill size orifice.

Regulator pressure

Nat.

10"