Dormakaba MUTO Premium Montage-instructies - Pagina 6

Blader online of download pdf Montage-instructies voor {categorie_naam} Dormakaba MUTO Premium. Dormakaba MUTO Premium 8 pagina's. Integrated locking device

Dormakaba MUTO Premium Montage-instructies
dormakaba Montageanleitung
Mounting instructions
10
Replacing battery
WARNING
Risk of injury due to heat generation,
explosion and fire
Improper handling of batteries (e.g.
overheating, destruction, recharging, use
of the battery in other products) can cause
heat generation, explosion and fire. There is
a risk of injury.
• Only use the battery types recommended
and approved by dormakaba.
• Observe warnings on the batteries.
• Only use the batteries as intended.
• Pay attention to the correct polarity.
Always observe the warnings on batteries. Only use
the battery types recommended and approved by
dormakaba.
Type AAA 1.5 volt lithium batteries
The battery may be replaced by the operator.
Dismantling is carried out in reverse order of the
mounting instructions. Please refer to the mounting
instructions for your MUTO sliding door system.
Proceed as follows to replace the battery:
1.
Remove the end caps (Fig. 7/1) and the cover
profile (Fig. 7/2) from the track.
1.
Fig. 7
Remove the end cap and the cover profile
6
MUTO Comfort / Premium
2. Replace the batteries, observing the polarity.
Fig. 8
Replacing the batteries
3. Mount the cover profile and the end caps on the
track.
11

Disassembly and disposal

Disassembly is carried out in the reverse order of
mounting and must be carried out by qualified
personnel.
The product must be disposed of in an
environmentally friendly manner.
Electrotechnical parts and batteries must not
be disposed of as domestic waste. Dispose of
electrotechnical parts and batteries in the designated
acceptance and collection points. Refer to the
statutory regulations for your country.
2.
WN 058855 45532
Replacing battery
2020-03