Dormakaba 5750-K Installatiehandleidingen - Pagina 9

Blader online of download pdf Installatiehandleidingen voor {categorie_naam} Dormakaba 5750-K. Dormakaba 5750-K 9 pagina's. Electronic entry device
Ook voor Dormakaba 5750-K: Gebruikershandleiding (2 pagina's), Gebruikershandleiding (2 pagina's)

Pagina afdrukken

dormakaba

2666 KNOB ASSEMBLY

2666

The holes required to mount the knob need to be drilled 1.25" apart and must be centered over the spindle hole.

1. To install the Knob Assembly, remove the insert from the front of the knob.

2. Cut the spindle to a length of .820" (20.8mm) plus the door thickness (Figure )

NOTE: the spindle must be deburred.

3. Install the knob assembly using the two 8-32 x 5/16 phillips pan screws.

4. Install the lock (with the bolt extended) onto the spindle, placing it flush to the mounting surface. Refer to lock

installation instructions which are available at www.kaba-mas.com.

Figure 14

DOOR

Total Mounting Thickness = door thickness

+ mounting plate