Advance acoustic SC250 Gebruik en onderhoud - Pagina 2
Blader online of download pdf Gebruik en onderhoud voor {categorie_naam} Advance acoustic SC250. Advance acoustic SC250 2 pagina's.
Pagina afdrukkenATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
The machine
doesn't work
as it should?
1. Check if the battery is charged.
The suction
doesn't work
as it should?
1. Check if the recovery tank is full.
The machine
doesn't clean
as it should?
1. Check to see if the solution filter is
The brush
doesn't work
as it should?
1. Adjust the brush pressure by turning
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
2. Check if the battery is correctly
fitting in the machine. (*)
2. Check if dirt and debris are clogging
the squeegee inlet and if the blades
are worn or damaged.
2. Check if the holes in solution
dirty. Clean it if necessary.
dispensers are clogged. Remove
them and clean if needed.
2. Check for brush wear, and make
the regulation knob.
sure that it is installed correctly.
TROUBLESHOOTING
SC250
™
3. Machine fault indicated by LED's
blinking. (*)
3. Rinse the inside of the duct recovery
hose with water.
3. Check to make sure the quick
connect valve is not leaking.
3. Check to see if there is debris that is
preventing the brush from rotating.
(*) For these causes the maintenance
procedure must be performed by an
authorized Advance Service Center.
For further information refer to the
Service Manual, available at any
Advance Service Center.
4. Check if the float cage is clean.