Advance acoustic 107404753 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Advance acoustic 107404753. Advance acoustic 107404753 20 pagina's.

4.2

Clearing a clog

•

Foot pedal must be used to release base to operating/non operation position. Failure to

do so could result in damage to the release mechanism.

•

Always disconnect the power cord before performing any ma-

chine maintenance.

Whenever (10) "Restricted Airflow Light" indicator comes on, check the

following: Is the bag full and needs to be changed or is the tube, hose

or nozzle blocked.

For details of dust bag replacement see separate instruction in this

manual. If the light comes on before the bag is full, the inside of the

bag may be coated with very fine dust (change the bag), or debris may

have clogged the hose between the brush and the bag.

First remove the upper hose and wand, and inspect them for clogged

debris. Then detach the wand receptacle by pulling at it. It will lay flat

on the floor, connected to the base hose.

Release and remove the brush cover and brush as described on page

14. Now inspect the lower hose, looking through it from the wand re-

ceptacle to the brush housing area. You should be able to see clear

through it. If you can't there is probably debris clogged in it. You may

remove the debris by pushing it forward to the brush opening with a

long narrow object, such as a ruler or screw driver. Pull the debris out

from the brush housing opening until you can see clearly through the

hose.

Once the clog is cleared, replace the brush and brush cover. Then re-

attach the wand receptacle, which clicks into place.

CAUTION

WARNING