Battery Solutions DDR 400 Instructies voor verpakking en verzending - Pagina 2
Blader online of download pdf Instructies voor verpakking en verzending voor {categorie_naam} Battery Solutions DDR 400. Battery Solutions DDR 400 2 pagina's. Kit (damaged lithium)
Pagina afdrukkenDDR 400 Kit (Damaged Lithium)
Packaging & Shipping Instructions
Step 7. Close Drum Lid
A. Place Lid on Drum
The metal lid should be
placed on the drum's
rim. To ensure proper
alignment, press the
along the lid edges.
See manufacturer for closer instructions here:
Important Notes
Kit Limitations:
Total combined battery/device weight is limited to gross weight 181.4kg
(400 lbs). Only one battery or device per anti-static bag. Packages
containing damaged or defective lithium batteries are forbidden from air
transport.
Bag & Protect Batteries:
Batteries must be sealed in anti-static bags and insulated with
appropriate packaging material, in a manner to prevent short circuits
during transportation. Non-conductive tape must be use when taping
exposed terminals and wires.
Marks/Labels Required:
The following marks are required for shipments of Li-ion EV batteries:
•
Shipping from address
•
Ship to address
•
The appropriate labels from the listed, as seen below (appropriate
labels are included in kit)
*This information is interpreted directly from the Transportation code, contained in
for more detailed info on the shipping of batteries according to the U.S.D.O.T.
F-18004
B. Adjust Locking Ring
Place the locking ring
over the rim of the drum,
with making sure it is
secured around all sides.
https://batterysolutions.com/closure-instructions-ddr-400-drum
DDR 400 Kit Packaging & Shipping Instructions
800.852.8127 | batterysolutions.com
C. Align Locking Ring
Align the locking ring
with the screw connected
through both holes of
ring.
Included in Kit
• Overpack Box
• Metal Drum
• Metal Lid
• Locking Ring
• CellBlock
• Drum Liner
• Anti-Static Bags
• Special Permit Label
• Lithium UN Label
• Tape Strip
• Zip Tie
• Instruction Sheet
Any UN numbers not included in kit
should be covered or crossed out
before shipping.
•
UN3480 - Lithium-ion Batteries
•
UN3481 - Lithium-ion Batteries
contained in equipment
•
UN3090 - Lithium Metal Batteries
•
UN3091 - Lithium Metal Batteries
contained in equipment
Title
D. Place & Lock Ring
Use drill to ensure that
locking ring is secured
tightly.
49. Please refer to that code
10/12/2021 R7