BatteryMINDer 1215C Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} BatteryMINDer 1215C. BatteryMINDer 1215C 16 pagina's. 12 volt 1500 ma convertible charger - maintainer - desulfator

Pagina afdrukken

BatteryMINDer

1. Place the negative (BLACK) connection on the negative battery

terminal.

2. Place the positive (RED) connection on the positive battery

terminal.

3. Plug in the BatteryMINDer.

4. Charging will be

leads if you do not see this.

CHARGING STAGES

• Soft-Start Mode: when battery voltage is below 10.5 volts due to deep

discharge UNIT WILL ATTEMPT TO RECOVER IT. If successful unit will

automatically switch to full power Constant Current mode. If if cannot, due

to faulty shorted cell(s) it will shut down and indicate such.

be REPLACED for both SAFETY as well as performance reasons.

•

Constant Current: This stage recharges battery to 85% of its present

capacity before automatically switching to Absorption stage.

•

Absorption: completes the full charge before unit switches to Maintenance

(aka Float) mode

•

Maintenance (aka Float): keeps battery at full charge while continually

desulfating it, ensuring full capacity for the longest possible life.

ADDITIONAL FEATURES

• Desulfation is the removal of sulfate build-up from your battery's plates. It

occurs at all times the unit is connected.

• Short Circuit, Spark and Reverse Polarity Protection prevent the unit

from having any output unless it is properly connected to your battery.

• Ambient Temperature Sensor (ATS-1), comes already installed on the

Temperature Sensor input connector. Do not detach.

• Temperature Protection shuts down the unit if operating temperature is

exceeded.

Rev. A-061015

START-UP OPERATING INSTRUCTIONS

GREEN

(flashing) (see item #5 in Table 2.) Reverse

Page 10

Model 1215C

Battery MUST

P/N VDC1215C-MNL