battioni Pagani GARDA 6500 Gebruiks- en onderhoudshandleiding - Pagina 10
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} battioni Pagani GARDA 6500. battioni Pagani GARDA 6500 20 pagina's.
Pagina afdrukken
instructions manual
for use and maintenance of the combined groups for the GARDA / LEDRA series
Setting the pace since 1953
3.2 HYDRAULIC CENTRIFUGE DIAGRAM
The hydraulic diagram of the operation of the centrifuge is represented
in Figure 1 showing the entry of the liquid/slurry "B"
and the output of the liquid/slurry "A".
"B"
Figure 1
3.3 INSTALLATION DIAGRAM
3.4 UNINSTALLING
The GARDA or LEDRA Group must be uninstalled using the following procedure:
1) stop the PTO of the tractor.
2) remove the drive shaft from the PTO;
3) remove the connecting pipe that connects the rotary blades vacuum pump to the tank, as described in the
"Instructions manual for use and maintenance" of the individual pumps;
4) remove any hydraulic connections;
5) disconnect the centrifugal pump from the tank;
6) remove the fixing screws from the gearbox;
7) uninstall the GARDA or LEDRA Group;
To reinstall, proceed as for the first installation.
p. 25