DAGE-MTI DC-200 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DAGE-MTI DC-200. DAGE-MTI DC-200 17 pagina's. Color

Pagina afdrukken

1. Specifications

For example, to change the shutter setting from off to auto:

1. Press

MENU. WHITE BALANCE

2. Press

DOWN. SHUTTER

3. Press

RIGHT. OFF

4. Press

settings, when

5. Press

press

LEFT

items in a similar matter.

NOTE: When editing

CAMERA TITLE,

activate the adjustment cursor, then

values and

LEFT/RIGHT

White Balance

One Push: By pressing the

remote, the camera automatically white balances to the

present scene, then stores setting until

pressed again or camera power is turned off. When

camera power is turned back on a

cycle is performed. Pressing the

automatically changes the White Balance menu setting

from the previous setting to the

There must be adequate white area in the scene and

illumination to perform a white balance or the camera

will wait before completing the white balance. The

typical method of white balancing in this mode is to

set the illumination level, place a white object in the

scene (if there is not enough white in scene), then

press

ONE PUSH. ONE PUSH (AWB

readjusted when light intensity is changed.

will be flashing.

to scroll through the available

DOWN

appears, stop.

AUTO

to store

AUTO

then

MANUAL WHITE BALANCE

an additional

to change characters as necessary.

will be flashing.

and turn off display, or

to edit other menu

DOWN

press is needed to

RIGHT

UP/DOWN

ONE PUSH (AWB

ONE PUSH

and

to change

) on the

ONE PUSH

button

setting.

) should be

)