Double K Industries 9000 II Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Double K Industries 9000 II. Double K Industries 9000 II 4 pagina's. Animal dryer

Pagina afdrukken

IMPORTANT SAFEGUARDS

WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ
COMPLETELY BEFORE USING PRODUCT!
When using electrical appliances, especially in the presence of children and animals,
basic safety precautions should always be followed to reduce the risk of re, electric
shock, and personal injury, including, but not limited to the following:
1.
Only use product for its intended purpose: animal drying.
2.
Unplug unit when not in use.
3.
Do not use extension cords with dryer.
4.
Do not unplug unit by pulling on cord.
5.
Do not expose dryer to rain or water.
6.
Do not use or store dryer where it can fall or be pulled into tub or sink or stand-
ing water. If dryer falls into water . . . UNPLUG IT . . . Do not reach into the water!
7.
Unplug unit before attempting any maintenance or service.
8.
Do not put any object into dryer openings.
9.
Keep loose clothing, jewelry and hair away from dryer openings.
10.
Do not direct dryer air towards eyes or ears of people.
11.
Never use dryer if it has a damaged cord or plug, has been dropped, damaged,
exposed to rain or water. Return to Double K Industries or an Authorized
Service Center for service.
12.
Recommended operation by adults only. Use caution when working around
children.
13.
Use only attachments recommended by Double K Industries.
14.
Do not operate without filters in place. Keep filters clean, as dirty filters limit air
intake and may damage the motor or cause overheating.
15.
Plug only into a properly grounded receptacle. Always make sure the amper-
age of the electrical outlet is su cient for the amperage rating of the product.
(See Product Speci cations for amperage rating of this product).
16.
Do not attempt to perform any service or maintenance not outlined in instruc-
tion manual.
17.
Do not attempt any product modi cations or alterations. Do not use, if any
parts or switches are damaged - send to an Authorized Service Center or
Double K Industries for service.
18.
When servicing, use only Double K Industries parts.
Minimum Air ow Position
2
(View with Sound Cap removed to show lever position)
Maximum Air ow Position
ASSEMBLY:
Dryer and Stand
The stand tube assembly is pre-assembled and wrapped in paper. The stand tube
assembly is compressed and held in position by the center clamp. Loosen the handle
on the clamp and allow the spring to extend the tube assembly. Place the end of the
larger outer tube down into the center of the stand base. Twist and push down rmly
(see ref #55, 57 on parts diagram). On the dryer head assembly, move the yoke to
a 90-degree angle to the dryer. Lift the dryer and position over the assembled
stand and slide the tube of the yoke into the upper stand tube (see ref #49, 53). With
clamping handle still loose, raise or lower dryer to desired height and tighten stand
adjustment handle as explained in the next paragraph (see ref #45).
Stand Height Adjustment and Dryer Angle Adjustment:
Your dryer has "ratchet" type adjustment handles on the stand and the dryer. To
tighten an adjustment handle, turn the handle clockwise as far as is comfortable. As
necessary, for additional tightening, pull the handle out to disengage the "ratchet"
and while keeping the handle pulled out, turn the handle counter-clockwise to a
suitable position for continued tightening. Release the handle to engage the
"ratchet" again and repeat these procedures until the adjustment handle is tight.
Reverse the turning direction of these actions to loosen an adjustment handle.
NOZZLE: The nozzle at the end of the extension arm may be rotated to change the
direction of the airflow. Simply rotate nozzle to the desired direction (see ref #42).
Optional Attachment: A hose and nozzle kit is available for the Challengair 9000
II. To attach the hose to the dryer, insert hose end into the arm extension nozzle. To
attach nozzles to the hose, simply push nozzle securely onto the hose end.
Dryer Stand: Your dryer stand has two locking casters to keep the dryer from rolling
inadvertently. To lock wheels, press down on the lock arm that has "ON" engraved on
it. To unlock, press down on the lock arm that has "OFF" engraved (see below). For
long life and smoother operation, avoid rolling casters through hair that has fallen
on the oor.
These parts only
on locking wheels
OFF
Locking
ON
Wheels
Locked
Unlocked
7