Electralog Electric Fireplace Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Electralog Electric Fireplace. Electralog Electric Fireplace 14 pagina's.

13. Do not modify the heater. Use it only as described in this manual. Any

other use not recommended by the manufacturer may cause fire, electric

shock, or injury to persons.

14. To reduce the risk of electric shock, this heater has a polarized plug (one

blade is wider than the other). This plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician to install the proper outlet. Do

not change the plug in any way. Avoid the use of an extension cord.

Extension cords may overheat and cause a risk of fire. If you must use an

extension cord, the cord must be No. 14 AWG minimum size and rated no

less than 1875 Watts.

15. Do not burn wood or other materials in the Compact Fireplace.

16. Do not strike the front glass.

17. Always use a certified electrician should new circuits or outlets be

required.

18. Always use properly grounded, fused and polarized outlets.

19. Disconnect all power supply before performing any cleaning, maintenance

or relocation of the heater.

20. When transporting or storing the heater and cord, keep in a dry place, free

from excessive vibration and store so as to avoid damage

SAVE THESE INSTRUCTIONS

NOTE: Procedures and techniques that are considered important

enough to emphasize.

CAUTION: Procedures and techniques which, if not carefully

followed, will result in damage to the equipment.

WARNING: Procedures and techniques which, if not carefully

followed, will expose the user to the risk of fire, serious injury,

illness or death.

NOTE: This equipment has been tested and found to comply with

the limits for Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio or television reception,