Dahua A10169 Snelstarthandleiding - Pagina 10
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dahua A10169. Dahua A10169 16 pagina's.
Pagina afdrukken
Step 4
Select the devices that need initialization, and then click Initialize.
The password setting interface is displayed. See Figure 2-2.
Step 5
Set and confirm the password of the devices, and then enter a valid email address.
Click Next.
The final setting interface is displayed.
Password can be modified or reset in System Settings.
Step 6
Select the options according to your needs and then click OK.
The Initialization interface is displayed after initializing is completed. Click the success
icon (
Step 7
Click Finish.
The device status in the Modify IP interface (Figure 2-1) turns to Initialized.
2.2
Modifying Device IP Address
You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batch.
Modifying IP addresses in batch is available only when the corresponding devices have the
same login password.
Step 1
Do Step 1 to Step 2 in "2.1 Initializing Device" to search devices in your network
segment.
After clicking Search setting, please make sure the username and password are the
same as what you set during initialization, otherwise there will be "wrong password"
notice.
Step 2
Select the devices whose IP addresses need to be modified, and then click Modify IP.
The Modify IP Address interface is displayed. See Figure 2-3.
Figure 2-2
Password setting interface
) or the failure icon (
) for the details.
Network Configuration 3