Baumer 11209335 Bedieningshandleiding - Pagina 5

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Baumer 11209335. Baumer 11209335 29 pagina's. Off-highway multi-object radar sensor
Ook voor Baumer 11209335: Handmatig (36 pagina's)

Pagina afdrukken

vehicle (e.g. a tractor) or an implement (e.g. combine header, sprayer boom) shall be deter-

mined. For flat and unstructured surfaces (e.g. asphalt, concrete) the usage of the "Off-High-

way Distance Radar Sensor" (R600V.DAH5-11205779) is recommended. The 122GHz band

NOTE

For flat and unstructured surfaces (e.g. asphalt, concrete) the usage of the

"Off-Highway Distance Radar Sensor" (R600V.DAH5-11205779) is recom-

mended.

can be used in many different applications. The original equipment manufacturer or system

integrator must observe local restrictions regarding the usage and/or placing in the market of

this product.

The sensor may be integrated into vehicles with 12VDC and 24VDC vehicle power supplies,

and provides a CAN SAE J1939 interface with a set speed of 250kbit/sec (may be customized

to allow 500kbit/sec for customer specific sensors). The output rate defaults to 50ms, but may

be varied between 10ms and 1000ms. High visibility LEDs display the sensor status, even in

bright ambient light.

1.3.2

Audience

This manual is intended for original equipment manufacturers (OEMs), or system integrators;

but not the end-users of equipment. It is the responsibility of the OEM / system integrator to

provide a user manual where relevant information from this manual is passed on, if it either

directly affects the safety or indirectly as discovered during a safety assessment of the con-

sequences of this product's integration. The Baumer "Off-highway Ground & Crop Radar sen-

sors" are not intended for safety applications and potentially explosive atmospheres. The OEM

or system integrator must ensure the safety of the equipment on which this product is used.

The manual is written based on current information. Baumer reserves the right to update prod-

ucts, documentation and its manuals if better information becomes available.

CAUTION

This product must not be used in safety applications and in poten-

tially explosive atmospheres.

1.3.3

Application Policy

Baumer products are applicable to a wide range of applications and / or end-use cases.

Baumer cannot know all possible conditions under which products are installed, used, and

operated. Every application and / or use-case is unique. The suitability and functionality of a

Baumer product and its performance under different applications and / or end-use cases can

only be verified by testing, and shall ultimately be the responsibility of the Baumer customer

using a Baumer product. When the product configuration (software version, electronics revi-

sions, mechanical revisions, etc.) is changed the customer needs to validate and verify the

Baumer product to ensure the proper function in the application and / or end-use case.

R600V.DAE0_manual_1.5 (EN).docm

Last Update: 07 Jan 2021

Manual R600V.DAE0 (EN)

Page 5 of 29