Doug Fleenor Design E8ANL-DIN Configuratiehandleiding - Pagina 3
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Doug Fleenor Design E8ANL-DIN. Doug Fleenor Design E8ANL-DIN 12 pagina's. 8 channel ethernet to analog interface
Pagina afdrukken
Connect using DHCP and Node Discovery
This procedure is valid for PCs using Windows 7 or newer. Mac and Linux users who
require assistance can give us a call at (805)481-9599.
1. To begin setup, plug in the E8ANL-DIN and ensure that the red "POWER" LED
illuminates.
2. Run a CAT5E (or higher) cable from the Ethernet RJ-45 connector to a router
configured to serve DHCP (default for most 'home' routers).
3. Run another cable from the router to a Windows 7 (or newer) PC with an
Ethernet card set to use DHCP (standard for most 'home' PCs).
4. Next, download Node Discovery from our webpage at www.dfd.com. To do so,
navigate to the Node Discovery Page under the Ethernet Products heading.
Node Discovery is a simple application that allows you to find Doug Fleenor
Design Ethernet devices on your network. There is no need to install the
program, just unzip the file and double-click on NodeDiscovery.exe. Type in your
IP and subnet, click Discover, and then double-click on the interface you wish to
configure. It opens the device's built-in webserver for configuration. Below is a
screenshot that displays the output of a successful Node Discovery.
You will be brought to a page in the product's built-in webserver to configure the
selected E8ANL-DIN. The username and password are as follows:
Username: admin
Password: dmx512
Once entered, you can edit your password in the Admin tab.
Page 3 of 12