Dahua F Series Snelstarthandleiding - Pagina 15

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dahua F Series. Dahua F Series 18 pagina's. Hd ir bullet network camera
Ook voor Dahua F Series: Snelstarthandleiding (17 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (15 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (7 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (13 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (15 pagina's)

Dahua HD IR Vari-focal Dome Network Camera Quick Start Guide

3 Network Configuration

The IP address of all the cameras is the same when leaving factory (default IP192.168.1.108), in order

to make the camera get access to the network smoothly, please plan the useable IP segment

reasonably according to the actual network environment.

IP address can be acquired and modified through quick configuration tool for the cameras which are

accessed via wired network, it needs to connect wired network to configure wireless parameters

before using wireless network cameras. In this chapter, it will introduce the approach of modifying IP

address via "Quick Configuration Tool"; also you can modify the IP address in the network parameters

of the WEB interface, please refer to the document in the disk << WEB Operation Manual>> for more

details.

Note:

Currently the quick configuration tool only supports the cameras which apply to the same network

segment with computer IP address.

Step 1 Double click the "ConfigTools.exe" and open the quick configuration tool.

Step 2 Double click the device to be configured, the system will pop out the "Login" dialog box. Enter

the IP address, user name, password and port number of the camera, and click "Confirm".

Note:

The default user name and password are admin and admin respectively, the default of port is

37777. See Figure 3-1 for more details.

Figure 3-1