Dahua F Series Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dahua F Series. Dahua F Series 18 pagina's. Hd ir bullet network camera
Ook voor Dahua F Series: Snelstarthandleiding (17 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (15 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (7 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (13 pagina's), Snelstarthandleiding (15 pagina's)

Pagina afdrukken
Dahua F Series Snelstarthandleiding
Dahua HD Pinhole Network Camera Quick Start Guide
No.
Port
Port name
Audio output
AUDIO
1
OUT
port
Audio input
2
AUDIO IN
port
Micro SD
Micro SD
3
Card
Sensor port
4
SENSOR
Network port
5
LAN
Power input
6
DC12V
port
7
I/O
I/O port
Reset
8
Reset
Button
The following table shows more details about I/O port.
Port name
I/O port
Table 1-1 Description of port function
connector Function description
RCA
RCA
Micro SD
Card slot
Sensor
board
Ethernet
port
-
-
-
Table 1-2 Description of I/O Port
Cable port name
G
TX
RX
IN1
IN2
G
N1
C1
N2
C2
Output audio signal to the speakers and other
devices.
Input audio signal, receive analog audio signal
from pickup and other devices.
Micro SD card storage
Connect front end Sensor board, get image
data.
Connect standard Ethernet cable
Power port, input DC12 V or POE power
supply.
Connect I/O port.
It is used to restore factory default settings for
the device.
Note
Continuously press the button for over 5
seconds in the situation where the device is
working normally, then the system
configuration info can be restored to factory
default settings.
Function description
GND
232 sending port.
232 receiving port.
Alarm input port1，receive on-off signal from
external alarm source.
Alarm input port 2，receive on-off signal from
external alarm source.
GND
Alarm output port1
Alarm output port2
2