Dahua F Series Snelstarthandleiding - Pagina 13

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dahua F Series. Dahua F Series 15 pagina's. Hd ir bullet network camera
Ook voor Dahua F Series: Snelstarthandleiding (17 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (15 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (7 pagina's), Snelstarthandleiding (17 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (13 pagina's), Snelstarthandleiding (18 pagina's)

Dahua HD IR Bullet Network Camera Quick Start Guide

3 Network Configuration

The IP address of all the cameras is the same when leaving factory (default IP

192.168.1.108). To make the camera access to the network smoothly, please plan the

available IP segment reasonably according to the actual network environment.

The cameras which are accessed via wired network can acquire and modify the IP

address through "Quick Configuration Tool". This section introduces the approach of

modifying IP address via "Quick Configuration Tool". You can also modify the IP address

in the network parameters of the WEB interface. Please refer to the document WEB

Operation Manual in the disk for more details.

To modify IP address, do the following:

Step 1 Double-click "ConfigTool.exe" to open the "Quick Configuration Tool".

Step 2 Click

click Search setting.

The system pops up the Setting dialog box, see Figure 3-1.

Step 3 Set the device network segment, login user name and password, and then click

OK. The system will display the searched devices after searching completes.

Note

The default username and password is admin and admin respectively.

Step 4 Select the devices which IP addresses need to be modified, and then

click

The system will pop up the Modify IP Address dialog box, see Figure 3-2.

to enter the interface where you can modify IP address, and then

Figure 3-1