Baumer 22100 Handleiding voor installatie en gebruik - Pagina 5

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Baumer 22100. Baumer 22100 32 pagina's. Sine encoder with function safety with axial terminal box

Pagina afdrukken
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The sine encoder HOGS 100 S is an opto electro nic precision measurement device which must be
handled with care by skilled personnel only.
1.3
The expected operating life of the device depends on the ball bearings, which are equipped with a
permanent lubrication.
1.4
The sine part of the HOGS 100 S can be employed in function safety drive systems.
An error condition of the encoder is visible in the output signal until 25 ms.
The subsequent electronics have to detect that the signal amplitude is out of the interval
[0.7 V..1.4 V
pp
Please follow "Subsequent electronics requirements" in section 7.4.
There is no prevention by the encoder that the system get in operation after an error occures.
If it is required to stop the system continuously it must be guaranteed via the subsequent
electronics.
1.5
The storage temperature range of the device is between -15°C and +70°C.
1.6
The operating temperature range of the device is between -20°C and +85°C
(restricted in potentially explosive environments, see section 2), measured at the housing.
1.7
EU-Declaration of Conformity meeting to the European Council Directives.
1.8
The device is UL approved (not applicable for operation in potentially explosive atmospheres).
1.9
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association of the
German Electrical Industry).
1.10
Maintenance work is not necessary. Repair work must be carried out by the manufacturer. Alterations
of the device are not permitted.
1.11
In the event of queries or subsequent deliveries, the data on the device type label must be quoted,
especially the type designation and the serial number.
1.12
Encoder components are to be disposed of according to the regulations prevailing in the respective
country.
i
Warning!
Damaging the seal
MB183c - 11076880
] or the phase shift is out of the interval [90°±45°].
on the device invalidates warranty.
Baumer_HOGS100S-R_II_DE-EN (13A1)
1
General notes
2