Electric Eel Ecam Ace Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Electric Eel Ecam Ace. Electric Eel Ecam Ace 16 pagina's. Color video inspection system
Ook voor Electric Eel Ecam Ace: Bedieningshandleiding (4 pagina's)

Pagina afdrukken

INSPECTION PROCEDURE

Skids or sleeves should ALWAYS be used to protect the

camera head. Depending on the size of the pipe you are in-

specting, you may need to use a skid so the camera is cen-

tered or off the floor of the line. Care should be taken so the

skids do not snag in the line.

Under normal operating situations, the camera is used with a

smaller protective sleeve in lines under 4" in diameter or a

larger finned sleeve in 4" lines and larger.

Slowly push the camera into the pipe and negotiate the

camera into position to feed down the pipe making sure

the flex neck does not kink or double back on itself.

Push the camera slowly and carefully during the in-

spection taking note of the pipe condition for possible

hazards that may entangle or damage the camera on en-

try or retrieval.

When negotiating a corner, care should be taken not to

butt the nose of the camera against the sidewall with

any force. It would be better to let the camera "work"

its way around the corner. If resistance is encountered

when turning the corner and there is no visible signs of

blockage, turning the push rod or pulling the camera

back and forth sometimes helps.

Should resistance become extreme, or the camera get

entangled or stuck, slowly push it back and forth to free

it. Sometimes turning the push rod may also help. If the

camera is visible, you may be able to free it with your

hand or some other means.