Baumer HOG 86 M Montage- en bedieningsinstructies - Pagina 5

Blader online of download pdf Montage- en bedieningsinstructies voor {categorie_naam} Baumer HOG 86 M. Baumer HOG 86 M 40 pagina's. Incremental encoder with clamping element and insert nut
Ook voor Baumer HOG 86 M: Handleiding voor installatie en gebruik (44 pagina's), Handleiding voor installatie en gebruik (28 pagina's), Handleiding voor installatie en gebruik (36 pagina's), Montage- en bedieningsinstructies (32 pagina's)

Baumer HOG 86 M Montage- en bedieningsinstructies
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The incremental encoder HOG 28 (HOG 28 M) is an opto electro nic precision measure-
ment device which must be handled with care by skilled personnel only.
1.3
The expected service life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
Option earthing: The expected service life of the carbon brushes depends on the electrical
current and is usually consistent with the service life of the ball bearings.
1.5
The storage temperature range of the device is between -15 °C and +70 °C.
1.6
The operating temperature range of the device is between -30 °C and +85 °C,
measured at the housing.
1.7
EU Declaration of Conformity meeting to the European Directives.
1.8
The device is UL approved (not applicable for operation in potentially explosive atmospheres).
1.9
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.10
The device may be only opened as described in this instruction. Repair or maintenance work
that requires opening the device completely must be carried out by the manufacturer. Altera-
tions of the device are not permitted.
1.11
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.12
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
MB178T2 - 11081759
on the device invalidates warranty.
Baumer_HOG28-T2_II_DE-EN (19A1)
1
General notes
2