Baumer Hubner Berlin PMG 10 Proibus DP Handleiding voor installatie en gebruik - Pagina 10
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Baumer Hubner Berlin PMG 10 Proibus DP. Baumer Hubner Berlin PMG 10 Proibus DP 28 pagina's. Absolute encoder with magnetic sensing
Pagina afdrukkenMOUNTING / MOUNTING THE SPRING DISK COULING TO THE ENCODER
4.
MOUNTING
4.1
Mounting the spring disk couling to the encoder
We recommend using the Baumer Hübner spring disk coupling K 35, see
9, available as accessory. When other couplings are used pay attention to manufactu-
rer's notes.
)
4.2
Mounting to drive shaft
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error.
High runout of the drive shaft can cause vibrations, which can shorten the lifetime of
the encoder.
» Lubricate drive shaft!
» Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
The encoder must be mounted with cable connection facing downward and not
i
exposed to water.
7/25
2�5 mm
8
M
= 100 Ncm
t
7
10 mm
6
MB247EN - 11171697, 16A2, Baumer_PMG10-ProibusDP_II_EN
section 4.4, page