Baumer Hubner Berlin PMG10 Bedieningshandleiding - Pagina 19
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Baumer Hubner Berlin PMG10. Baumer Hubner Berlin PMG10 44 pagina's. Absolute encoder
Ook voor Baumer Hubner Berlin PMG10: Montage- en bedieningsinstructies (32 pagina's), Montage- en bedieningsinstructies (32 pagina's)
Pagina afdrukken
Baumer Hübner
6
Electrical installation
DANGER
Injury by to secondary damage
Encoder failure or incorrect signals may entail system control errors.
a) Eliminate secondary encoder damage by the relevant safety precautions in the downstream
electronics.
NOTICE
Sensor damage due to faulty power supply.
The sensor can be damaged due to faulty power supply.
a) Operate the sensor only with protected low voltage and safe electrical isolation of protection
class III.
NOTICE
Sensor damage or unintended operation due to work on live parts.
Work on live parts may lead to unintentional operation.
a) Disconnect the power before carrying out any cable.
b) Disconnect the power before connecting or disconnecting electrical connections.
NOTICE
Sensor damage by excessive switching voltage.
The sensor's overload limit is for protection only and not intended as limit for the permanently
switching voltage.
a) Make sure that the maximum permitted switching voltage is not exceeded.
V1 | PMG10 & PMG10P SSI
Operating Manual
Electrical installation
|
6
19