Douglas Dynamics 77850-3 Handleiding voor installatie-instructies - Pagina 7

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Douglas Dynamics 77850-3. Douglas Dynamics 77850-3 17 pagina's. Snowplow

Pagina afdrukken

1. Hydraulic Unit

A‑FRAME TO BLADE ASSEMBLY

1. Align the pivot bolt hole on the A‑frame with the

pivot bolt hole on the quadrant.

2. Install the pivot bolt from the top. Secure with a

1" locknut (found in the parts bag) and tighten the

locknut as much as possible while allowing the

A-frame and quadrant to pivot.

3. Move the snowplow into a normal operating

position.

Lit. No. 52238, Rev. 05

INSTALLATION INSTRUCTIONS

1" x 4" Clevis Pins

1" x 9"

Pivot Bolt

1" Locknut

(in parts bag)

4. Remove the protective packaging from the angle

rams.

5. Align the holes in the rod end of the angle ram

with the corresponding holes on the back of the

quadrant.

6. Install a 1" x 4" clevis pin (from the shipping

bracket) from the top down to attach each rod.

Secure the clevis pins with 1/4" x 1‑1/2" cotter pins

from the parts bag.

1/4" x 1-1/2"

Cotter Pin

July 15, 2020