Baumer PMG10P Bedieningshandleiding - Pagina 14

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Baumer PMG10P. Baumer PMG10P 44 pagina's. Absolute encoder
Ook voor Baumer PMG10P: Montage- en bedieningsinstructies (32 pagina's), Montage- en bedieningsinstructies (36 pagina's), Montage- en bedieningsinstructies (32 pagina's), Bedieningshandleiding (44 pagina's), Bedieningshandleiding (40 pagina's), Bedieningshandleiding (40 pagina's), Bedieningshandleiding (40 pagina's), Bedieningshandleiding (36 pagina's)

Installation

5.2

Mounting with base B3

5.2.1

INFO

Baumer recommends to use the Baumer Hübner K 35 spring disc coupling to connect the rotary

encoder and the drive shaft of the following device. The Baumer Hübner K 35 spring disc cou-

pling can be pushed onto the drive shaft without axial pressure.

Ill. 5: Attach coupling onto encoder shaft

Coupling

Tools

2.5 mm

Instruction:

a) Mount the coupling on the encoder shaft , observe the related mounting instructions.

b) When using the K 35 spring washer of Baumer Hübner, consider the maximum permitted

tolerances for mounting errors.

c) Fasten the coupling at the specified torque (K 35: Mt = 1 Nm (plastic side), Mt = 1.3 ± 10%

Nm (metal side)). Observe the remarks in the spring washer assembly instructions.

Also see about this

2 Maximum permitted tolerances for mounting errors when using the Baumer Hübner K 35

spring washer [} 17]

Operating Manual

Baumer Hübner

PMG10 & PMG10P SSI | V1