Comanche BITS Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Comanche BITS. Comanche BITS 6 pagina's. Bungee installation tool system

Pagina afdrukken
8. Pull the inboard part of the tool toward you. The
bungee is now engaged on the tool and free of the
inboard pulley on the landing gear bungee arm.
9. Grasp the bungee tool and the bungee and turn them
counterclockwise (as viewed from the inboard end of
the tool) until the bolt on the outboard pulley bracket
is unscrewed from the nut plate.
10. Remove the bungee tool and the bungee from the
plane.
Replacing the bungee on the installer tool:
1. Place the bungee stretcher tool in a vise using the tool
holding bracket provided.
2. Insert the bolt in the outboard pulley bracket through
the 3/8" hole in the outboard tool arm and secure it
with the nut provided, screwing the nut well onto the
bolt.
Stretcher Tool