1byone Audio-Technica AT3600L Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 1byone Audio-Technica AT3600L. 1byone Audio-Technica AT3600L 15 pagina's. Turntable hi-fi system with speakers
Pagina afdrukken
2.2 Connecting the device
Align the settings for the pre-amplifier selector switch and connect the
RCA audio cable to an input jack that is compatible with the connectable
equipment you are using (amplifier, active speakers, etc.).
• The RCA audio cable's red jack is for the right (R) channel, and the white jack is
for the left (L) channel.
With PHONO
PHONO
LINE
R
L
DC IN 15V
USB-PC
Connectable equipment
(Amplifier, etc.)
To outlet
With PHONO
Without PHONO
PHONO
AUX
L
R
L
Without PHONO
SPEAKERS
SPEAKERS
ON
OFF
R+R-
L+L-
To outlet
R
10
Main Power Connection
1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of the
turntable.
2. Plug the AC adapter into a normal power outlet.
NOTE: Do not plug the AC power adapter into a power outlet before all turntable
assembly is completed. Before turning on turntable power, recheck all connections to
make sure they are correct and secure. Always turn off the turntable before connecting
or disconnecting from power.
Power Management Function
The turntable will automatically go into standby mode after 15 minutes of inactivity.
To resume operation, press and hold the Mode button for 3 seconds.
Playing a Record
1. Before playing a record
1.1 Pull the protector straight forward to remove
it.
NOTE: Applying a downward force may cause
the stylus to come off the body. Only low
volume is output if the stylus has come off, or
is about to come off, so refer to "Replacing the
stylus" to reattach the stylus correctly.
1.2 Place the record on the felt mat so that the center hole aligns with the spindle.
If playing a 45 RPM record with a large center hole, attach the 45 RPM adapter.
Protector
45 RPM Adapter
11