Baumer Hubner Berlin TDP0,2LT-10 Montage- en bedieningsinstructies - Pagina 7
Blader online of download pdf Montage- en bedieningsinstructies voor {categorie_naam} Baumer Hubner Berlin TDP0,2LT-10. Baumer Hubner Berlin TDP0,2LT-10 32 pagina's. Tachogenerator with integrated centrifugal switch
Ook voor Baumer Hubner Berlin TDP0,2LT-10: Handleiding voor installatie en gebruik (28 pagina's), Handleiding voor installatie en gebruik (32 pagina's)
Pagina afdrukken
2
Security indications
2.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
2.2
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device.
The mounting instructions must be followed.
• It is essential that the specified clearances and/or angles are observed.
2.3
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force.
Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
2.4
Risk of destruction due to contamination
Dirt penetrating inside the device can damage the device.
• Absolute cleanliness must be maintained when carrying out any work on the device and while
changing the carbon brushes.
• Never allow lubricants to penetrate the device.
2.5
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the magnets and the carbon brushes. Dismounting a device, se-
cured to a shaft by adhesive may lead to the destruction of the device.
2.6
Explosion risk
Do not use the device in areas with explosive and/or highly inflammable materials.
They may explode and/or catch fire by possible spark formation.
MB079.1 - 11115288
Baumer_TDP02-FSL-TDPZ02-FSL_II_DE-EN (19A3)
Security indications
2
4