Asus AP100 Hardware referentiehandleiding - Pagina 21

Blader online of download pdf Hardware referentiehandleiding voor {categorie_naam} Asus AP100. Asus AP100 32 pagina's. Pentium ii startup server

II. System Components

CD-ROM Disk Drive

The CD-ROM disk drive mounts only in the 5.25" device cage and requires

signal and power connections like that of IDE hard disk drives. The power

and signal cable is straightforward with connectors designed to only fit cor-

rectly. The red stripe of the signal and power cables should face each other.

CD audio

output

CD-ROM drive connections

Expansion cards can be easily installed just like any standard PC computer.

Up to 4 PCI or 2 ISA (1 slot is shared allowing a maximum of 5 cards at one

time) cards can be installed. One AGP slot is also available for a high-end

graphics card.

Expansion Card Installation Procedure:

1. Follow the static precautions described in the

front of this manual.

2. Switch off your system and all peripheral de-

vices and remove the main power cord.

3. Remove the side panel to the chassis.

4. Find an unused expansion slot on the mother-

board and unscrew the metal cover plate from

the slot and put the screw to one side.

5. Ensure the jumpers (if any) are correctly set on

your expansion card

6. Align the card's connector with the expansion

slot on the motherboard and gently lower and push the card into the free

slot.

7. Secure the card to the expansion slot with the screw you removed from

the metal plate.

8. Attach cables or wires if necessary.

9. Reinstall the side panel if no other work is needed inside the chassis.

AP100 Hardware Reference Guide

NOTE:

A CD-ROM audio cable is

also provided in case you install an au-

dio card. The only function of the audio

cable is to allow you to direct the CD

audio out signal to your audio card. Data

signals travel through the IDE cable.

Red stripe of signal cable

Red stripe of power cable