Asus AP100 Hardware referentiehandleiding - Pagina 25

Blader online of download pdf Hardware referentiehandleiding voor {categorie_naam} Asus AP100. Asus AP100 32 pagina's. Pentium ii startup server

II. System Components

Device Connections

The following picture shows a completed server example with both stan-

dard and optional components.

The cables connect to the motherboard as shown. The motherboard includes

onboard SCSI with 68 pin and 50 pin SCSI connectors. The provided 68 pin

SCSI cable is designed for Ultra2 SCSI speeds and may be used for both

Wide-SCSI and Ultra2-SCSI devices.

Proper IDE device operation requires that the cable does not exceed 18

inches. If only one IDE device is used, connect it to the end of the cable.

Remove unused cables from the IDE connector for proper signal quality

and strength.

IMPORTANT:

You must use Ultra2 SCSI ribbon cables for Ultra2 devices.

Ultra2 ribbon cables (may be colored red and white) are similar to wide-

SCSI ribbon cables (normally colored gray) but each pair of wire is twisted

to reduce signal interference.

Device and cabling example

AP100 Hardware Reference Guide