Baumer FLDK 110C1006/S42 Gebruikershandleiding - Pagina 20
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Baumer FLDK 110C1006/S42. Baumer FLDK 110C1006/S42 35 pagina's. Laser copy counter
Pagina afdrukken
9.3
Sensitivity
Because the Scatec cannot discern between a front edge (which the customer wishes to detect) and a
spot on the object similar to an edge (e.g. crests or creases in the paper, creases in a carton etc), the
sensitivity of the sensor should be adjusted to the edge thickness to be detected. This means that the
sensor should be set to a sensitivity at which it detects all leading edges without being sensitive enough
to react to edge-like spots on the object thinner than the actual edge thickness.
It is possible to choose between two different sensitivity levels with DIP switch 4.
A diagram of the sensitivity in relation to the working distance and transportation speed is shown in Section
10.6.
9.4
Variation of the working distance
The thickness that an edge must have to be detected by the SCATEC-2 depends on the working distance.
The SCATEC-2 is most sensitive at the nominal working distance which is 40mm (FLDK 110x1003/Sxx
and FLDK 110x1303/Sxx) or 100mm (FLDK 110x1005/Sxx and FLDK 110x1006/Sxx). The relationship
between the sensitivity and the working distance is contained in the specifications in Section 10.6.
the sensitivity of the sensor varies with the working distance
Manual SCATEC-2
Version 2021-09
20
www.baumer.com
Baumer Electric AG
Frauenfeld, Switzerland