Amphenol RESMLAC 8US CAPS SX Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amphenol RESMLAC 8US CAPS SX. Amphenol RESMLAC 8US CAPS SX 12 pagina's. Rj-switch
Pagina afdrukkenRJ45 Wiring
Guidelines
Ethernet Cable
Pin-outs
Ethernet
Connector
Pin Positions
Ethernet
Connector
Pin-outs
Cable Distance
RESMLAC 8US CAPS SX - UM rev. 1.0
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 –
www.rjswitch.com
Use data-quality (not voice-quality) twisted pair cable rated category 5e (or better) with
standard RJ45 connectors.
Please note that these cables are available as straight-thru or cross-over configurations.
Either type can be used because these switches support auto-mdi/mdix-crossover. For
reference, the pin-outs of the two cable types are listed below.
Straight-thru Cable Wiring
Pin 1
Pin 2
Pin 3
Pin 6
Pin
MDI-X
#
Port
(typical for
1
TX+
2
TX-
3
RX+
6
RX-
The maximum cable length for 10/100BaseT(x) is typically 100 meters (328 ft.).
From
Switch
Switch or Hub
Note: Hubs and switches are different devices. Hubs simply broadcast all messages out
all ports. Switches intelligently route messages only out the appropriate port.
Pin 1
Pin 2
Pin 3
Pin 6
MDI Port
Auto-
MDI/
uplink)
MDI-X
RX+
TX/RX+
RX-
TX/RX-
TX+
RX/TX+
TX-
RX/TX-
To
Switch or Hub
PLC, Ethernet I/O, PC, etc.
Page 7 of 12
Cross-over Cable Wiring
Pin 1
Pin 2
Pin 3
Pin 6
Ethernet
Device
Port
RX+
RX-
TX+
TX-
Maximum Distance
100 meters (328 feet)
100 meters (328 feet)
Last Rev: 21-Jan-13
Pin 3
Pin 6
Pin 1
Pin 2