Amphenol C2LINX Series Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Amphenol C2LINX Series. Amphenol C2LINX Series 3 pagina's. Pre-terminated
Ook voor Amphenol C2LINX Series: Bestelhandleiding (9 pagina's)

Pagina afdrukken

10. Push the chassis all the way forward. You will

hear a click on both sides of the chassis

indicating the tab is fully engaged. Depress the

tab to release.

11. Tighten rack screws on the front mounting brackets.

Front

12. Open front doors by pinching both top and bottom

latches together and remove white foam block from

chassis.

ALERT! If Zone 4 seismic latches are required,

refer to Installation Guide

Take HD Links, the fiber cable routing arms, out of

packaging.

NOTE: There are left links and right links. Left links

install on left side and right links install on right side

when facing front of chassis.

C2LINX

Pre-Term

13. Starting with the bottom-most tray. Attach the

two bottom clips of the chassis wall links into the

square notches on the chassis side wall.

14. Rotate chassis wall links up until the top clip

snaps into place on the chassis side wall.

15. Attach other end of links to tray by squeezing

both centers together until they click into place

on the bottom most tray.

16. For remaining left and right trays and links, repeat

steps 22-24.

17. See Installation Guide for connecting and routing

fiber on front of tray.

509.926.6000 — amphenol-ns.com

Amphenol Network Solutions