Dover HYDRO DM-500 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dover HYDRO DM-500. Dover HYDRO DM-500 14 pagina's. Warewash dispenser
Pagina afdrukken
3.OO operation (continued)
3.O2 LED Pump Status Indicators
All DM-500 models have two LED indicators (one each for the Detergent and Rinse Aid pump). The color and states for each
condition are described below.
LED Color
Fixed or Flashing
Green
Fixed
Flashing
Orange
Fixed
Flashing
Red
Fixed
Flashing
4.OO service parts
Category
Part No.
Replacement squeeze tubes with compression fittings (packs of 10).
HYD10099124
HYD10099125
Installation Kits
Pickup / discharge tubing, foot filter, weight, injection fittings, mounting bracket and hardware
HYD10099142
HYD10099143
HYD10099144
HYD10099145
Indication
You should not see the LED display as fixed green.
(If you see the LED display as fixed green please contact Product Support at Hydro Systems)
The pump is running a top-up/rinse dose correctly.
The frequency of the flashing is proportional to speed of pump rotation.
The pump is powered ON but not dosing.
The pump is switched into the STANDBY mode.
The pump is in an alarm state or is jammed. Please contact Hydro Product Support.
The pump is running an initial charge dose correctly or is priming when in standby mode.
The frequency of the flashing is proportional to speed of pump rotation.
Description
10-Pack Santoprene®
10-Pack Silicone
CE Detergent Install Kit
CE Rinse Install Kit
UL Detergent Install Kit
UL Rinse Install Kit
DM-500
Squeeze Tube
Install Kit
(Typical)
11