AMPHIBICO HD Wave WAVH0760 Bedieningshandleiding - Pagina 4
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} AMPHIBICO HD Wave WAVH0760. AMPHIBICO HD Wave WAVH0760 10 pagina's. Amphibico wave housing (for the sony hdr-cx/pj 710, 730, 740 & 760 camcorders)
Pagina afdrukken1. POWER ON/OFF KNOB: Rotate to turn camcorder ON or OFF
2. REMOTE CONTROL COVER: This cover need to be removed, the camcorder remote control installed in position and the cover installed back in
position, (please see remote control section and the O-ring maintenance section for further details).
3. FOCUS, EXP. AE SHIFT & WB SHIFT KNOB: Use to select the various options available.
4. FOCUS, EXP. AE SHIFT & WB SHIFT TRIGGER: press to engage the feature selected with the knob (key #4).
5. HOUSING FOUR POINT BAYONET MOUNT: This bayonet mount is provided with port lock.
6. COLOR CORRECTING FILTER: This filter is provided for correcting colors underwater, a Green Water filter is also available optionally.
7. FLIP FILTER LEVER: Turn one side or the other to engage the color correcting filter.
8. PORT RELEASE PUSH BUTTON: pushing this button will unlock the port, rotate the port and pull out to remove.
9. HYDROPHONE: This hydrophone will records sound underwater when connected to the camera
10. LATCHES: the housing has three heavy duty latches with safety locks tabs to protect against accidental opening.
11. GRIPS HANDLES (X2): Left and right grip allowing the mounting of light fixture arms and accessories.
12. ACCESSORY MOUNTING HOLES: Two 1/4"-20 TPI holes per grips, are supplied to accept a TLC accessory or TLC base ball for mounting lights
arm or accessories.
13. GRIPS MOUNTING BRACKETS: These two mounting bracket offer a range of adjustment to position the grip in the most comfortable position on the housing.
14. GRIPS ADJUSTING SCREWS: uses theses to adjust the grips spacing for better comfort. The hexagonal key is supplied with the housing.
15. Bracket mounting screws (4x): theses four hex screws are for holding the mounting bracket, they are to be attached with the provided hexagonal key wrench.
16. VIEWING PORT WINDOW: This port window allows viewing of the images as well as the various modes, menus and functions of the camcorder; these
are accessible via the push buttons of the remote control and controls knobs.
17. SUNSHADE MOUNTING HOLES: these are for attaching the optional Sun Shade (Key #26)
18. OPTIONAL LOCATING HOLE: this threaded hole is supplied for possible future accessory attachment.
19. ACCESSORY BULKHEAD CONNECTOR HOLE: this hole is supplied for adapting potential accessories.
20. TRIPOD MOUNTING HOLES: a 1/4" X 20 hole is provided for mounting aTLC tripod, light trays or accessories.
21. SACRIFICIAL ANODE: A zinc anode is installed to protect your housing against salt water corrosion; It is made to deteriorate easier than the other strate-
gic part of your housing, hence the name sacrificial anode. This anodes need to be replaced by the user as needed.
22. RUBBER ANTI SKID PADS: Four rubber pads are provided to protect the housing and preventing it from sliding on wet decks.
23. CAMCORDER MOUNTING SADDLE: A sliding saddle is provided for quick installation and removal of the camcorder.
24. MOUNTING SADDLE LOCATING PINS: These will precisely guide the saddle in position.
25. REMOTE CONTROL RETAINING SCREWS: These are for securing the remote control, there is no need to over tighten these screws, the remote cover
is provided with a side seal O-ring which is not dependant on how tight these screws are.
26.DIRECT RECORDING BUTTON: Mechanical button for engaging record function.
27.REMOTE CONTROL: Supplied with camcorder, refer to camcorder manual for operation
28. SUN SHADE (OPTIONAL): This optional accessories help in shielding sunlight from the LCD screen, allowing for easier viewing
29.MOUNTING SCREWS FOR OPTIONAL SUNSHADE: Use to hold the optional sun shade in place
30.ACCESSORY DOVE TAIL: Use for mounting optional monitor or otheraccessories
31. DOME PORT: Removable dome port for Wide Angle work.
32. OPTIONAL FLAT PORT: Removable flat port for close up work.
33. DOME PORT BAYONET: This four point bayonet matches the one found on the housing.
page 3