amPHILI FUJI XW200-04A Installatie-instructie - Pagina 4

Blader online of download pdf Installatie-instructie voor {categorie_naam} amPHILI FUJI XW200-04A. amPHILI FUJI XW200-04A 4 pagina's.

mPHILI Inc.

Step 11

Install faceplate：

1. Connect the lamp wire connector back as well as detergent exit pipe disconnected in

STEP-7；

2. Insert the front of the faceplate into the flange of the enclosure and put on the two screws

on front end. Then put on those three screws at the back end clos2 to the wall；

（Make sure the screw is align to the hole. Do not force the screw into the hole.）

Remove the cardboard taped on the wall in STEP-4.

Step 12

Use fingers to pull out the black rubber pipes from the holes.

Step 13

Install three oil reservoirs；The big one at back is slid in. Those two

under the fan are twist and lock.

Step 14

Remove the protection film from the stainless steel enclosure；

Use the portable vacuum cleaner to clean the work place

Step 15

Test run：Fan power, lamp, fan speeds etc.

1-888-680-0086

www.amphili.com

ver.2012-03-29