Amphony H1000 Gebruikers- en installatiehandleiding - Pagina 3
Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} Amphony H1000. Amphony H1000 8 pagina's. 2.4 ghz digital wireless headphones
Ook voor Amphony H1000: Vergelijking van functies (1 pagina's), Productinformatie (4 pagina's), Veelgestelde vragen (4 pagina's)
Pagina afdrukken
User and Installation Guide
Step 2
Placing the transmitter
The operating range essentially depends on how many obstacles there are
between the transmitter and the headphones. Therefore, it should be carefully
considered where to place the transmitter.
Below, two examples are given. In the first example, there are 4 walls between
the transmitter and the receiver. The transmission may be interrupted. By
locating the transmitter such as in the second example, reliable transmission
to all of the 6 rooms is possible.
Also, the elevation of the transmitter as well as the presence of reflecting walls
will influence the range.
It is suggested to experiment in order to find the best location for the
transmitter.
If sufficient coverage can not be achieved by changing the location of the
transmitter, then the use of RangeBooster transmitters is suggested. These
RangeBooster transmitters are available as an accessory for your 2.4 GHz
Digital Wireless Headphones from Amphony and can be located in areas
where signal reception is difficult. RangeBooster transmitters connect to the
DATA OUT output of the transmitter and receive the signal in a digital format
without any degradation. Any number of RangeBooster transmitters can be
used to extend the operating range almost indefinitely.
Example 1: Poorly chosen
transmitter location
Example 2: Improved
transmitter location
R
Page 2