Amphony H2500 Veelgestelde vragen - Pagina 2

Blader online of download pdf Veelgestelde vragen voor {categorie_naam} Amphony H2500. Amphony H2500 5 pagina's. 5.8 ghz digital wireless headphones
Ook voor Amphony H2500: Vergelijking van functies (1 pagina's), Productinformatie (4 pagina's), Specificaties (4 pagina's), Gebruikers- en installatiehandleiding (12 pagina's)

Q: Is the technology used in these headphones similar to Bluetooth or MP3 ?

A: Even though both our headphones and Bluetooth / MP3 use digital audio, there is a fundamental

difference between Bluetooth and how audio is transmitted to our headphones. Bluetooth is only

able to transmit audio data at very low data rates reliably (typically up to 200 kbps). Therefore, only

compressed audio can be transmitted via Bluetooth. A commonly used technique to compress

audio data is MP3. Our headphones, however, do not compress the audio and transmit the full bit

rate. As a result, the audio quality is not degraded such as with MP3. Also, the audio latency (audio

delay) of MP3 compressed audio is fairly high and thus not suitable for television or video

applications. Since our headphones do not compress the audio and since only a minimum of data

buffering is used, the audio delay is minimal.

Q: How does the transmitter connect to my audio equipment ?

A: The transmitter connects to any standard analog audio line output via the supplied stereo RCA

audio cable and to coaxial and optical digital audio outputs. In cases where no analog line output

(RCA audio out) is available, the transmitter can also connect to other audio outputs via appropriate

adapters which are not supplied with the product. By using a Y adapter which has either a 3.5 mm

or a 6.3 mm audio plug on one side and 2 RCA plugs on the other side, the transmitter can be

connected to headphone outputs.

Q: Can the transmitter connect to the digital audio output of my audio equipment ?

A: Yes, in addition to the analog audio interface, the Model 2500 transmitter features a coaxial and

an optical digital audio interface. By using one of these interfaces, the transmitter can be connected

to any standard digital audio output. The transmitter will format the digital audio data and send it to

the headphones without making any changes to the audio data or sample rate and without applying

any audio compression. Therefore, the audio data received by the headphones is exactly the same

as the data which is received at the digital input. The digital inputs of the transmitter bypass the

integrated analog-to-digital converter and eliminate any unnecessary analog-to-digital or digital-to-

analog conversion. Since no noise or audio degradation is introduced by the digital audio interface,

the signal-to-noise ratio is highest when using a digital audio interface. Please note that the digital

audio interfaces only process uncompressed linear audio data at the sample rates of

32 kHz, 44.1 kHz or 48 kHz. They do not process compressed multichannel audio data. In such a

case, an external surround decoder is necessary or the analog audio interface can be used.

Q: What is Forward Error Correction and why is it used in these headphones ?

A: Occasionally, there may be some data which is corrupted during transmission. This may be the

case when there is interference, such as other transmitters, electrical sparks or if you move around

and the signal is temporarily lost. Forward Error Correction as it is used in our headphones can in

most cases repair the data which is received to guarantee 100% correct data reception and

therefore 100% correct audio reception.